Danby Designer Ice N Easy Dim1524w Not Working

Danby DIM1524W Ice'n Easy 33 Ice Maker - Use Manual - Use Guide PDF.
Documents: Go to donwload!

• Owner's manual - (English, French, Spanish)

Owner 's manual for Danby DIM1524W

Table of contents

• Important Safety Information
• Safety Precautions
• Grounding Instructions
• Operating Instructions
• Features of Your Ice Maker
• The Controls of Your Ice Maker
• Ice Making
• Ice Size Selection
• Delayed Start
• Self-Clean Mode
• Helpful Information
• Draining Your Ice Maker
• Care and Cleaning
• If Something Goes Wrong
• Before Your Call For Service
• Warranty

Operating Instructions

The Controls on Your Ice Maker

1. Electronic Display - shows timer setting, selection indicators, and status icons.

2. Power Button - used to turn unit on or off, also used to cancel the timer and/or currently running program.

3. Ice Size Selector - Allows you to select between three (3) available ice sizes.

4. Increase Button - Used in conjunction with the timer feature, each depression adds .5 hours to the set timer.

5. Decrease Button - Used in conjunction with the timer feature, each depression removes .5 hours from the set timer.

• Small Cube -Denotes that the ice maker is currently set to produces small size cubes.

• Medium Cube - Denotes that the ice maker is currently set to produce medium size cubes.

• Large Cube - denotes that the ice maker is currently set to produce large size cubes.

• Timer - Displays the delayed start set time.

• Power - This icon flashes when the power is off and becomes static when the unit has been powered on.

• Bucket Full - Illuminates to indicate that the water bucket is full and will need to be emptied before the ice making process can resume.

• Add Water - Illuminates when the internal reservoir requires filling before proceeding or continuing with the current selected program.

• Fault - displayed when the unit has entered a fault mode and is not able to begin or resume the current mode. Please refer to page 11 for instructions should this situation occur.

• Pump - Illuminates when the unit is pumping water from the internal reservoir to the water bucket during the ice making cycle and the self clean mode.

Ice Making

• 1 Add water to 'fill line'.
• 2 Press the power button.
• 3 Change the ice size if you don't want medium cubes.

To immediately begin the ice making process;

• Remove ice bucket and add water to Fill line.(approx. 3.5 L)

• Reinsert the ice bucket and press the Power button.

• Select the desired ice cube size (See "Ice Size" below).

• The ice maker will automatically begin approximately 15 seconds after the last button is pressed.

Please note: The length of the ice making process is directly proportionate to the current ice size setting and batch completion time range between 9 minutes and 15 minutes per cycle, depending upon your ice size selection. For optimal results, please keep the ice maker door closed during the ice making process.

Ice Size Selection

• 1 Press Power or enter Delayed Start mode (see below).
• 2 Depress the ice size selection button on the control pad.

The ice size selection button allows you to choose from small, medium or large ice cubes.

By default your ice maker is configured to produce medium size ice cubes. However if you would like a different size of cube, you need only depress the ice size selection button to cycle between the three (3) available sizes (small, medium and large.)

Ice size change is possible during the running ice making cycle, however it is recommended to wait until the current cycle is complete before defining a new ice size.

NOTE: Unless there is a power failure or power interruption to the unit. The ice size selection you have made will be retained as the default ice size.

Delayed Start

• 1 Add water to 'fill line'.
• 2 Ensure the power is off.
• 3 Press the increase & decrease arrows simultaneously
• 4 Select timer length.
• 5 Select required ice size.

• Remove ice bucket and add water to Fill line.(approx. 3.5 L)

• With the power off. Press the Increase/Decrease buttons once simultaneously to enter the timer set mode.

• Each subsequent press of the increase button will increase the timer in 30 minute increments up to 12 hours. Alternatively to subtract time from the timer, press the decrease button to decrease the timer by 30 minute increments.

• Reinsert the ice bucket and select the ice size you require.

• The ice maker timer will automatically start 10 seconds after the last button is pressed. To cancel the timer at any time and begin the ice making process immediately, simply press the power button.

Self-Clean Mode

• 1 Add water & vinegar (1:1)
• 2 With the power off, simultaneously depress the increase & decrease arrows twice.
• 3 Drain after program is complete.
• 4 Add fresh water to fill line.
• 5 Repeat Step 2
• 6 Drain after program is complete.

The self-clean mode should be put into operation before you use your ice maker for the first time and/or if there has been a long period without use.

Stage 1

• Add equal parts of water and vinegar (1:1) to the ice maker's reservoir.

• With the power off, press the increase and decrease arrows simultaneously two times to activate the self-clean mode. Please note, the self clean mode with automatically initiate approximately 10 seconds after the last button depression.

• During the self clean mode, the upper ice bucket is filled and dumped multiple times and the pump will remain in continuous operation as it feeds water to the bucket and evaporator coils. This cycle continues for approximately five-anda-half minutes. Upon completion, the unit automatically powers down and is now ready for stage 2.

Stage 2

• Drain the cleaning solution from the internal reservoir by removing the rear drain cap and plug (see pg. 9).

• Add fresh water to the 'Fill line' in the internal reservoir.

• With the power off, press the increase and decrease arrows simultaneously two times to activate the self clean modewhich will now act as a rinse. Upon completion of this final stage of the self clean process, the unit automatically powers down once again. Proceed to drain the water from the internal reservoir and leave the lid on the ice maker open to allow it to air dry

Newest Added: DFF180E1BSS DFF123C2WDD DFF123C1WDBL DFF121C2WDBL DFF116B2WDBL

rossanionvely.blogspot.com

Source: https://manualsfile.com/product/k2nly065dys.html